Moxon Rectangle directional antenna frame

The Moxon Antennas is a simple directional antenna design that is easy to build and has decent (5-6db) directional gain.

All you need is a connector pigtail and some 18-20awg solid wire. Connect the center wire from the pigtail to one side of the element, and the ground to the opposite element. Connect to your radio and point towards where you want to transmit/receive.

These frames are tuned to a specific center frequency. Pick the one that best fits your needs.

465mhz - FRS/GRMS radios

868mhz - LoRa Europe meshtastic / meshcore radios

915mhz - LoRa North America meshtastic / meshcore radios

Leave comments if you would like other frequencies.

These frames are based off the scan v3 file here: https://github.com/gaspode-t-wonderdog/moxon-frame-generator