The Bone Banner - Undead Standard Bearer

🚩 The Bone Banner - Undead Standard Bearer (Classic Series)

"Where the flag of the dead flies, the living shall tremble. A silent symbol of an empire that refuses to stay buried, the Bone Banner is the rallying point for every skeletal horde."

Elevate your Undead Army with the Bone Banner. This model is the essential centerpiece for your skeletal units in D&D, Pathfinder, or any fantasy wargame. It features a weathered skeleton warrior holding a massive, tattered flag that tells the story of a thousand forgotten battles.

📏 Scale & Design

• Scale: 32mm Heroic (Standard RPG size).
• Base: 32mm integrated scenic round base.
• Design: The flag is designed with a "heavy" fabric look, ensuring it has enough thickness to be sturdy while maintaining a realistic, torn appearance.

⚙️ Print Settings (High Precision)

This profile is strictly tuned for ultra-detail to ensure every rib and fabric tear is captured:

• Resolution (Layer Height): 0.08mm (Mandatory for the level of detail shown in the photos).
• Nozzle: 0.4mm.
• Infill: 15% Gyroid.
• Supports: Tree Supports.

🛠️ Post-Processing & Support Warning

Read carefully before removing supports:

• Tricky Areas: The supports are significantly more difficult to remove on the left arm (the free arm not holding the banner) and around the skull/neck area.
• Technique: Use fine flush cutters and work slowly in these zones. The bone structure is thin at 0.08mm, and excessive force might snap the arm or the jaw.
• The Banner: The flag pole is sturdy, but snip the support branches starting from the base and moving upwards to avoid putting stress on the skeleton's joints.

🎨 Painting Strategy

• The Banner: Use a dark, desaturated color as a base, then dry brush with a lighter tan to highlight the ragged edges.
• The Skeleton: Use a "Skeleton Bone" base followed by a brown wash to bring out the fine details of the 0.08mm print.

🔥 BUILD THE ULTIMATE UNDEAD ARMY! This is part of a complete set. Download the Necromancer, the Lich, the General and the Skeleton Troops to dominate your tabletop! 👇 Links below!

Or try my Haunted Tree 👇

📂 Browse All My Miniatures HERE

Technical & Creative Note: This design is based on an AI generation (Tripo) that I have manually refined and tested on FDM prints to ensure printability and quality. The featured photo is of the actual physical print. I’ve included AI-colored renders only as a visual reference for those who wish to paint the miniature.

🛠️ Support the Process!

💡 What you see is what you get: Unlike many profiles that only upload digital renders of unprintable models, every single design here is fully test-printed, refined in Blender/Meshmixer, and optimized for FDM before release.

I spend hours tweaking geometries, custom supports, and wasting my own filament so that you can enjoy a flawless, hassle-free print on your first try.

If my test-printing hours saved your time and filament, feel free to keep my printers running and fuel the next project! Any support is greatly appreciated: paypal.me/mjrko84