rambox divider - Free 3D Print Model

Search models, users, collections, and posts

nottingham82

Hobby & DIY>Vehicles

IP Report

Print Profile(3)

All

P1S

X1 Carbon

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

shorty divider with handle multicolor

Designer

2.5 h

1 plate

5.0(6)

Multicolor print in ASA 0.24mm layer, 2 walls, 15% infill

Designer

3 h

1 plate

5.0(5)

shorty no handle strength profile mulitcolor

Designer

2.6 h

1 plate

4.5(2)

Open in Bambu Studio

Boost

276

409

231

Released

Description

Summary

rambox dividers. Fits my 2018 ramboxes.

Edit 7-9-25: added a 5 inch shorty divider as requested to fit 2023 middle dividers

Comment & Rating (29)

@PetesMcGeets

(2023 model) The boxes won't close if I put the original design in the middle slot of the Rambox, so I cut it down a bit to make sure it closes. The back slot is just a little smaller for some reason, so I'm going to try scaling it down a couple percent. I'll share more when I've tested. Working on another print profile for each size based on my testing. Matching the colors of the truck though and I love it. The black one was my first print with ABS and I'm not a fan. Not your fault.

(Edited)

The designer has replied

@nottingham82

Thanks for your input. I have the original fusion files so I can update it or you can do an adjusted print profile so you get some points or a remix. Whatever you like. I'm easy to work with.

@PetesMcGeets

Replying to @nottingham82 :

I don't care about the points or whatever. I found the original is fine for the front slot, scaling to 97% is perfect for the back slot, and the middle slot can't be any taller than 5 inches due to the latch mechanism. So I did a rough cut in the studio at 122mm. It fits good there.

@nottingham82

Replying to @PetesMcGeets :

Ok I added 2 shorty models. 1 has the handle like the other big ones but the logo is a bit smaller. The other has no handle and the logo is the same size as the bigger ones. Print profiles added as well. Thanks for the feedback.

@user_4053034477

I printed this out and it looks great. I went with a black divider and a white RAM logo. Fits great the in the forward location of the box. I can snake it in to the middle location and it's too big for the rear location. 2020 Ram 1500 Laramie. Printed on Bambu Labs X1C @ .20mm Standard setting.

The designer has replied

@nottingham82

Good to know. Mine is 2018 so I guess I need to alter slightly for 2020s. Let me know what to change and I'll shoot you a file to try.

@user_4053034477

@user_2521949732

Boosted

Print Profile

shorty no handle strength profile mulitcolor

Solid, fit like a glove beautiful design thank you so much saved me over $700 bucks if I had to buy from the manufacturer.

@Ghoulco8

Print Profile

shorty divider with handle multicolor

printed the shorter ones for a buddy with a 2023 ram, the outermost slots I needed to scaled down a bit still as they rub on lettering that sticks out inside the storage area when you go to slide them in but other than that worked great can’t believe how much dodge charges for these things 😂

The profile uploader has replied

@nottingham82

if you have the scaled down profile saved feel free to post it as a print profile. these were designed for 2018 so I think 2019 and above are all gonna need that scales down version

(Edited)