CS Design

cover

IMG_4937.jpg

IMG_4938.jpg

IMG_4939.jpg

2026-01-23 13_17_37-.png

Slicer.jpg

IMG_4946.jpg

IMG_4947.jpg

IMG_4945.jpg

Plate Holder Base with BambuLab Logo

plate_1.png

5 Plates

plate_2.png

4 Plates

plate_3.png

3 Plates

plate_4.png

2 Plates

plate_5.png

Plate Holder Base without BambuLab Logo

plate_6.png

IMG_4936.jpg

Included base with/without logo and 2-5 plates sleeves

wivaca

20260520_080139.jpg

20260520_080319.jpg

Build Plate Holder.png

This profile prints the model with the Bambu Logo side flat on the build plate to reduce filament waste if you want to print in multi-colors like pictured.  I recommend a low texture plate like a Cool Plate Super Tack to avoid the orange peel of the PEI plate. You must have supports turned on (they should be in the file) and there will be many of them as shown in the third Preview picture.&nbsp;CAUTION: The open cavity for the inserts needs a lot of support, yet supports can only go so far sideways when printed in this orientation. In the two larger areas of the dog-bone shape, there are some nail-biting spans of a tens of mm that printed on my P2S with this profile, but I highly recommend you are present and watching the print job once it is far enough into the gray that it starts printing over this cavity!  It happens around layer 114.&nbsp;Also, supports print on the air intake framework that goes under the printer, but some of those spans in gray on my print would not look great if they were exposed. They&#39;re fine hidden under the printer.&nbsp;I have included all the original plates by the author in this 3MF file.  Only the first has been modified to turn the main component.&nbsp;

0.2mm layer, 2 walls, 10% infill

user_3262785829

693cee4ec5e1b504.webp

0.2mm layer, 2 walls, 5% infill

Yasiek

Zrzut ekranu 2026-06-23 224408.png

IMG_20260623_224308.jpg

IMG_20260623_224119.jpg

IMG_20260623_223841.jpg

IMG_20260623_223703.jpg

<ul><li>for 3 plates</li><li>a bit shifted for easy take</li><li>bigger gap for thick plates</li><li>guide in a back  </li></ul>

3-PLATE INSERT, bigger gap (for PEI SMOOTH), SHIFTED....

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

A build plate holder designed specifically for the P2S and X2D, taking the new air intake into account so it doesn’t block airflow like many other existing designs. Features interchangeable inserts for 2 to 5 build plates, so you can mix and match plate count and colors to fit your setup. Integrated hooks latch securely under the air-intake opening. Installation is quick — just a slight push, or lift the printer a bit and slide it in. No tools, no screws.  <boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please drop a Boost so more people can see this design. Appreciated!</boostcontent></boostme><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002336129/design/5354f069620f4471.gif"></figure>

P2S/X2D Plate Holder with Interchangeable Inserts

ASIA

Print Profile(4)

Bill of Materials

Description

Comment & Rating (369)

License

Related Models