ottimoooo buono a sapersi, e complimenti per il modello, se vuoi lasciare una valutazione te ne sarà grato :)

great good to know, and congratulations on the model, if you want to leave a rating I will be grateful :)

HazmatSuit

ridimensionato in scala 1/18 tutto perfetto bellissimo 

scaled to 1/18 everything perfect beautiful

mirko.rigo

user_43217875

0.16mm layer, 2 walls, 15% infill

user_4090082288

murica

user_3036774067

Ozzynokaoi

cover

IMG_6671.PNG

IMG_6673.PNG

IMG_6674.PNG

IMG_6675.PNG

IMG_6677.PNG

Cassa

plate_1.png

Motori

plate_2.png

Ventole

plate_3.png

Cattura.PNG

Cattura 1.PNG

ad6f1d2a613799b4.png

Seguite le regolazioni che ho salvato sul mio profilo di stampa per non avere problemi, fate attenzione a raffreddare i pezzi prima della rimozione dal piatto, soprattutto per quanti riguarda le ventole. Non sono richiesti supporto, ( se utilizzate uno Smooth Plate è consigliabile attivare un Bim esterno di almeno 1,5mm&nbsp;!!! Se notate che le parti si staccando dal piatto durante la stampa, vi consaiglio di applicare della colla o lacca per PLA, in quanto sono molto piccoli !!!

Follow the settings I saved on my print profile to avoid problems. Be careful to cool the parts before removing them from the plate, especially for the fans. No supports are required (if you use a Smooth Plate, it is advisable to enable an external brim of at least 1.5mm).&nbsp;!!! If you notice parts detaching from the plate during printing, I advise you to apply glue or PLA hairspray, as they are very small !!!

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Ho voluto realizzare un accessorio fondamentale per i nostri diorami in scala 1:64, ovvero un carrello con ventole per  il raffreddamento del veicolo durante il banco prova o verniciatura. &nbsp;

I wanted to create an essential accessory for our 1:64 scale dioramas, specifically a cart with fans for cooling the vehicle during test bench procedures or painting&nbsp;

Print Profile(1)

Description

IF YOU WANT TO SELL MY CREATIONS YOU MUST BUY THE COMMERCIAL LICENSE WHICH YOU CAN FIND HERE ON MAKER WORLD!!!

You can sell many of my models, why take the risk?

(if you are caught selling my products without a license, you will be reported and prosecuted for copyright infringement THIS IS NOT A JOKE!).

Comment & Rating (9)

License

Related Models

1/64 Garage Cooling Cart