Whetstone angle guide(Knife sharpening aid) - Free 3D Print Model - MakerWorld

Search models, users, collections, and posts

Remixed by

Tools>Other Tools

IP Report

Print Profile(3)

All

P1S

P1P

X1

X1 Carbon

X1E

A1

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Standard print, 0.2mm layer, 2 walls, 15% infill

Standard print, 0.2mm layer, 2 walls, 15% infill

28 min

1 plate

4.8(136)

super fine - 0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

super fine - 0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

1.8 h

1 plate

4.9(14)

PETG, 0.2mm layer, 2 walls, 20% infill, Gyroid infill

PETG, 0.2mm layer, 2 walls, 20% infill, Gyroid infill

35 min

1 plate

4.8(13)

Open in Bambu Studio

Boost

395

1228

167

34

3.1 k

2.6 k

Released

Description

I added text to it so you can remember the use.

PLA, 0.15 mm layer height , 10%infill.

Comment & Rating (167)

@user_4211101834

Print Profile

Standard print, 0.2mm layer, 2 walls, 15% infill

looks great on 0.2 nozzle. but with 0.4 nozzle, you might be able to see the letterings.

3

Reply

Boosted

Print Profile

Standard print, 0.2mm layer, 2 walls, 15% infill

perfect

2

Reply

@user_844665588

Thanks for releasing your profile setting for ultra fine printing. It not only came out great but it also let me know the limitations of a 0.4 nozzle in terms of ultra fine detail printing. Good benchmarking print profile.

0

Reply

Print Profile

Standard print, 0.2mm layer, 2 walls, 15% infill

printed at 1.2 layer height.

0

Reply

Print Profile

PETG, 0.2mm layer, 2 walls, 20% infill, Gyroid infill

Works really well. It helps a lot for a beginner.

0

Reply

Print Profile

super fine - 0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

Nice print. Should come in handy.

0

Reply

Print Profile

Standard print, 0.2mm layer, 2 walls, 15% infill

Super

0

Reply

Print Profile

Standard print, 0.2mm layer, 2 walls, 15% infill

came out pretty good on 0.4 nozzle

0

Reply

Printed without any issues. It’s a bit hard to see the lettering with a 0.4 nozzle. I wouldn’t have minded a version with just the degrees. I might try some light sanding to see if it cleans it up a little more but I think it’ll work for its intended use just fine.

0

Reply

Print Profile

Standard print, 0.2mm layer, 2 walls, 15% infill

works amazing with PLA basic

0

Reply

@user_3687546285

Print Profile

super fine - 0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

print profile worked great. thanks

0

Reply

This remix is based on

Whetstone Knife Sharpening Aid

Whetstone Knife Sharpening Aid

License

This user content is licensed under a

Creative Commons Attribution-Noncommercial

Related Models

Gravity X Karambit Fidget Knife [No screw needed]

Gravity X Karambit Fidget Knife [No screw needed]

29.8 k

10.2 k

Drill Dust Collector

Drill Dust Collector

YelTrik Designs

43.6 k

17 k

Whetstone Knife Sharpening Aid

Whetstone Knife Sharpening Aid

2.6 k

467

25 k

4.8 k