Outlet Shelf Pro ( 2 or 4 plug model)
Print Profile(2)
Description
Overview:
That outlet wasn’t doing anything useful anyway.
Outlet Shelf Pro turns a standard wall outlet into a clean, practical mini shelf for phones, remotes, wallets, keys, or whatever usually ends up lost. No drilling, no adhesives, no clutter just smart use of wasted space.
What This Is:
- A plug cover replacement with an integrated shelf
- Mounts to a standard US duplex outlet using the existing center screw
- Clean, low-profile design that sits flush and level
- Single-piece print with built-in strength where it matters
Ideal for bedrooms, kitchens, offices, workshops, or anywhere counter space is tight.
Supports & Removal Notes
- Designed to print with minimal supports
- Remove carefully while the print is still warm to avoid flexing the shelf edge
- No post-processing required beyond normal cleanup
If your printer can handle a wall plate, it can handle this.
Important Notes
- Do not over tighten the outlet screw snug is enough
- Designed for standard US duplex outlets only
- Light-duty shelf not intended for heavy objects
- Not designed for use near sinks, tubs, or wet locations
Fire Safety Disclaimer:
Standard outlet covers are typically made from fire-resistant materials. PLA is not fire-rated.
While the risk of an electrical fire is low, it cannot be completely eliminated. By printing and installing this cover, you assume full responsibility for your safety and any potential consequences. Use this design at your own discretion and install it at your own risk.
If you’re uncomfortable with that, don’t install it. Simple.
Usage & Licensing Disclaimer:
Free to print for personal use
Commercial use requires a commercial license
Selling physical prints or profiting from this model without proper licensing is not permitted
Power responsibly.
Commercial License:
Membership
If you are interested in selling physical prints of my designs in your local or online store, or if you just want to support my work
________________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________________
Support:
Boost Me (for free)
Your support helps me create and maintain Lykoi Studio's. Thank you!
________________________________________________________________________________________________________________________________________
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (31)