Knipex Pliers Safety Holster – 87 01 125 mm - Free 3D Print Model

Search models, users, collections, and posts

Carota3D

Tools>Hand Tools

IP Report

Print Profile(2)

All

X1 Carbon

P1P

X1E

H2D Pro

A1 mini

P1S

H2S

H2C

P2S

H2D

X2D

A2L

pla 0.08mm layer, 4 walls, 15% infill

Designer

2.9 h

1 plate

4.9(7)

ABS 0.08mm layer, 4 walls, 15% infill

Designer

2.8 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

204

641

278

182

Released

Description

Rigid 3D printed safety holster designed to secure pliers during transport and storage.
Prevents accidental opening and protects the tool when not in use.

Compatibility:
Designed and tested with Knipex® 87 01 125 pliers.

This product is not affiliated with, endorsed by, or sponsored by Knipex.

Boost Me (for free)

se ti piace è vorresti altri accessori simili sostienimi con un piccolo boost !!!! grazie

Comment & Rating (44)

@user_3907252348

is there one for the 7 1/4 inch knipex?

The designer has replied

@carota

hello ! no but I can do it give me the code and I will provide it

Show original

@carota

86 03 180 ?

@user_3907252348

its 87 01 180

@Jordanj20

can't rate so only comment asked cautiously how do you print this? Do I have to do something myself, so it's not just print and press print? apparently I overlooked that I didn't have the pliers I ordered them especially even though they are much too small to use but I wanted your holster now I have pliers without use and a holster as a paperweight that cannot be displayed I can understand that you program things so that they are not for sale, but for people who might want to use them, they should be reasonably nice, shouldn't they? So, if there is still a tip on how to get this off, I would be grateful. Otherwise, this is the biggest trash. information that the part must subsequently be processed with special tools and primed and then painted would have been helpful to keep your hands off it

The designer has replied

Show original

@carota

don't worry, worrying about it is useless! regarding the clamp, you must know it and know how to use it where needed if it's not adequate for the job you have to do, get a bigger one and don't feel obligated to print my products if you need assistance I am here and I can give you a hand regarding printing: what filament do you use? did you do the manual filament calibration, because out of 89 printed and 138 downloaded, all managed to get to the functional product! once the printer is calibrated, things get simpler ... unfortunately when you print at 0.08 layer and a single material, the problem is that there is too much adhesion between the support and the object if you have ams I will make you a program with suitable support material but you would have more waste or I could even make bigger layers but you would lose quality ... the decision is yours

Show original

@M.Matz

Print Profile

pla 0.08mm layer, 4 walls, 15% infill

Is there also one for the 150 pliers

The profile uploader has replied

Show original

@carota

I'll do it soon... follow me!

(Edited)

Show original

@carota

I have released version 87 01 150 !!!!!!!!

(Edited)

Show original

@carota

vista?

@user_1016819971

any chance therew is a file for the right side?

The designer has replied

@carota

Not yet, but if you want I can try to design it! support me!

@user_3623265574

Mirror the file simply

Show original

@carota

If you mirror it, you should also mirror the pliers, otherwise you wouldn't have the block

Show original

@user_3907252348

is there a 87 01 180?

The designer has replied

@carota

it will be released soon! be patient

Show original

@Jordanj20

done already? where can I find it then? Greetings 🖖

Show original

@carota

the 150 is out give me some time and I will draw the 180 too don't worry

Show original

@user_932226272

86-03-125. can you make a matching one for the smooth jaw ones?

The designer has replied

@carota

I will put your request in the queue, I will do it but not immediately wait and follow me for more updates! 87 01 150 will be released soon thank you

Show original

@carota

output the 87 01 150! I will finish the 86 03 125 soon

Show original

@carota

exit 86 03 125 visit my profile

Show original

@user_1183987517

what was used for the pins?

The designer has replied

@carota

the filament (1.75mm) itself from the spool, if you have abs it is better

Show original

@carota

if you go on Instagram there is the assembly video

Show original

@mdtate37

does this work with 88-180?

The designer has replied

@carota

I don't believe try

Show original

@RapidRiver

what are yall doing to get the supports off? Im using PETG and they wont budge.

@Mighty_Nug

Print Profile

pla 0.08mm layer, 4 walls, 15% infill

The profile uploader has replied

@carota

What can we improve?

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.