MJ - michael jackson hueforge
Print Profile(1)
Description
Boost Me (for free)
se sei fan di michael jackson devi stampare questa huforge, fatta in suo onore.
e se ti piace, votami con un boost!! per te è gratis, per me e fonte per farne altre!!!!
grazie.
Project: MJ.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.56x200.04mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with BambuLab Black
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to Marine Blue
At layer #20 (1.68mm) swap to Yellow for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)