Brennenstuhl Ecolor ECL USB 04 mounting bracket

Mounting brackets for Brennenstuhl ECL USB04 extension cord (https://www.brennenstuhl.com/en-DE/products/extension-leads/extension-lead-ecolor-with-usb-charger-4way-black-black-1.5m-h05vv-f-3g1.5-with-switch).

Mount 225 mm apart (measured on flat sides facing each other). Printed in PETG HF, but whatever filament (incl PLA) should work. 3 screws is overkill but gives options for mounting. Got them mounted myself with 1 and 2 screws.

V1 (not published) featured clips flush with the back wall of the “cup”, but those broke already when (admittedly not very carefully) removing from the printbed, so a bit of stiffening was added.