Robert Smith (The Cure) Portrait (HueForge)
Print Profile(2)
Description
Boost Me (for free)
Do you like my designs? Please boost me! It helps!
Create a stunning HueForge wall art portrait of Robert Smith from The Cure with this high-detail, multi-color 3D print design. Perfect for music lovers, collectors, and fans of alternative rock, this model transforms layered filament into a vibrant, gallery-style portrait using HueForge technology.
Designed for precision and contrast, this project works best with a 0.2mm nozzle, but it is also fully compatible with 0.4mm nozzles.
📐 Model Overview
- Subject: Robert Smith (The Cure)
- Style: HueForge layered portrait / wall art
- Model Size: 133.3 × 133.3 mm
- Unique Filaments: 7 colors
- Use Case: Music-themed wall décor, fan art, collectible display
This print is optimized for high-resolution shading and depth, making it ideal for framed display or studio decoration.
🖨️ Recommended Print Settings
Basic Settings
- Infill: 100%
- Layer Height: 0.08 mm
- Base Layer Height: 0.16 mm
- Base Thickness: 0.48 mm
- Actual Thickness: 1.84 mm
- Maximum Allowed Thickness: 2.24 mm
💡 You may print at higher layer heights below the base thickness of 0.48 mm if needed, but best results are achieved at 0.08 mm.
Nozzle Compatibility
| Nozzle Size | Result |
|---|---|
| 0.2 mm (Recommended) | Maximum detail and sharpness |
| 0.4 mm (Supported) | Good results with slightly reduced fine detail |
🎨 Filament & Color Profile
This HueForge project uses 7 carefully selected filaments for accurate color blending and depth.
| Color | Brand / Type | Hex Code | Transmission Distance |
|---|---|---|---|
| Black | Sunlu PLA+ | #000000 | 0.6 |
| Blue | Sunlu PLA+ | #0041cc | 4 |
| Red | Sunlu PLA+ | #d22332 | 6 |
| Yellow | Sunlu PLA+ | #d5ff01 | 10 |
| Grey | PolyLite PLA | #8c9099 | 1 |
| Orange | eSun PLA+ | #ff7713 | 5 |
| White | PolyLite PLA | #e2dedb | 5 |
⚠️ For best results, use filaments with similar optical properties if substituting brands.
🔄 Filament Swap Instructions
Follow these manual filament changes for correct color layering:
- Start: Black
- Layer 8 (0.72 mm): Swap to Blue
- Layer 9 (0.80 mm): Swap to Red
- Layer 13 (1.12 mm): Swap to Yellow
- Layer 16 (1.36 mm): Swap to Grey
- Layer 17 (1.44 mm): Swap to Orange
- Layer 18 (1.52 mm): Swap to White (finish print)
The printer will pause when printing Yellow. At that moment, you can replace Black with Grey, Blue with Orange, and Red with White.
✅ Make sure filament changes are clean and precise to avoid color bleeding.
❤️ Support the Designer
If you enjoy this design and would like me to keep creating more 3D print designs:
This model is optimized for searches related to:
- HueForge wall art
- Robert Smith portrait
- The Cure fan art
- Music-themed 3D print
- Rock legend wall décor
- Multi-color filament artwork
- 3D printed portrait
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)