Klaus and Elijah Mikaelson - The Originals Hueforge

The orignal brothers - Klaus and Elijah 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #c12e1f PLA BambuLab Basic Red  Transmission Distance: 3.8
    #000000 PLA BambuLabBlack  Transmission Distance: 0.1
    #5b6579 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.2
    #ffffff PLA sunlu white  Transmission Distance: 6.8
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Red
    At layer #8 (0.72mm) swap to BambuLab Black
    At layer #10 (0.88mm) swap to BambuLab Basic Blue Gray
    At layer #13 (1.12mm) swap to Kingroon Black
    At layer #18 (1.52mm) swap to sunlu white for the rest.