Splat! the Slider + Flip Fidget => Print in Place

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance, then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

SPLAT! 💥 Meet the Splat Slider + Flip Fidget — the fidget that looks like it just got splashed, spilled, slimed, or absolutely Nickelodeon-ed. 

It flips, slides, rotates, twirls, spins, twists, and slips with a super satisfying motion, all wrapped up in a delightfully chaotic splat shape. Whether you see paint, goo, slime, or that classic game-show “uh oh,” this one is pure tactile fun. It’s print-in-place, single color, and ready to bring the mess without the cleanup.