45-degree drilling template for 3,4,5,6,8,10mm
Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
Like that -> Boost Me
Version 1: See description below
Version 2: With 3, 4, 5 mm (so far only in this version)
Distance to the center of the hole increased to 30 mm (this was a suggestion in the comments)
Hole diameter increased by +0.1 mm in the design. However, the small holes are still tight and may need to be lightly drilled out
Wall thickness around the holes increased
Infill pattern set to “Gyroid” for particularly good stiffness
Created in two versions:
- Version A: for multi-color printing
Version B: for single-color printing, with the letters recessed inward
It is a drilling template for drilling at a 45-degree angle
It has guides for 6 mm, 8 mm, and 10 mm holes
Using the notches, alignment can be adjusted very precisely
There is enough space at the back to attach a clamp for fixation
Important notes:
The drilling template must be printed with sufficient infill; otherwise, the drill bit may damage the template due to insufficient guidance
In general, proper guidance of the drill bit is important to keep the template as undamaged as possible
Depending on the accuracy of the 3D print, it may happen that the drill bit has to clear the drilling path by itself during the first use
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)