One Piece Berry Doublesided realistic coin

One Piece Berry Gold coins - now doublesided in full 3D!

Original coin design made by @Jangy on his Coin model - go and leave him a like!

Overengineered for a smoother coin feeling under fingers and with palpable borders. Only approx. 8% of weight difference between the sides of the coin - which makes them great for flipping and stacking, being only 2,6g per coin it makes them nicely balanced.

Each coin have to be glued together with cyanoacrylate glue (Super glue). Both sides have a recess for the small filling which facilitates even gluing.

DISCLAIMER - Filling is really tiny, it's actual printed size can depend on your filament/printer/retraction/speed/flow. For me they are printing great as you can see on pictures, but depending on your setup you may have to scale them up/down OR print the long fill from plates 2 / 3 and cut it to size with a sharp blade.

If you have good eye-hand coordination You can glue both sides without the filling altogether - filling is only as an additional helper.

1st plate is a set of 1 coin, ready to be printed from the app - it's a 15min print

2nd and 3rd plates are both with 25 pcs of each side + fillings (they are 0,07g each so if you want to use them it's negligible usage of filament, better to have more than later print extras)