Rebel Loon - Minnesota - Magnets

This is a remix of the ‘Red Eye’ version of the original model to increase sizes and add magnet holes for some common sizes I had on hand.

There are 2 small variants with 6x3 and 8x3 magnets.  Each uses a single magnet.  These are 50% larger than the original. 

I used these magnets:

6x3 - https://www.amazon.com/dp/B0CCXGX138?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

8x3 - https://www.amazon.com/dp/B0CCXGX138?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1

There is 1 large variant that uses 20x3 magnets.  This uses almost the entire plate.  This has 4 magnet holes to allow a stronger attachment if desired.  1 magnet will hold it on the fridge; I'd use 2 or more if its going to be placed outside.

I used this magnet:

20x3 - https://www.amazon.com/dp/B0CCX9ZJKN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

All the magnets are sized to press fit, but a dab of glue may be required to keep them locked it.

All magnet holes are negative parts, and labeled in the ‘Objects’ tab for each variant:

If you have different magnets, you can scale this object to fit different dimensions:

• Make sure ‘uniform scale’ is disabled when modifying the size

Let the Rebel Loon rise