Stand for Dell XPS 13 Convertible

This is a custom 3D-printed stand for the Dell XPS 13 Convertible (13-inch), mainly designed for drawing, note-taking, and general desk use.

The focus is on stability and airflow. The stand keeps the device solidly in place (even when pressing with a pen) while lifting it off the desk so it can breathe properly.

• Very stable for drawing
  The angled position and reinforced side arms reduce wobble, even with heavier pen pressure.
• Strong but simple construction
  The load is carried through the side supports and bottom frame, making the whole thing feel solid without being bulky.
• Good airflow & cooling
  • Raised base creates space to the desk
  • Side guide slots let air pass through
  • Bottom vents stay open and unobstructed
• Made for a convertible
  Works nicely in tablet-leaning or angled display mode.
• Fully screwed together
  No glue. Everything is held together with screws and heat-set inserts, so it’s easy to reassemble or tweak.

Required Hardware

Screws

• Top bar
  • 2 × M5 × 18 mm screws
• Bottom frame
  • 4 × M5 × 18 mm screws
• Side / adjustment mounts
  • 2 × M3 screws with washer + T-nut
    or alternatively
  • 2 × M4 screws with T-nut

Threaded Inserts (Heat-Set / Knurled Nuts)

• 6 × M5 knurled heat-set inserts
  • Size: M5 × Ø5 × 7 mm or M5 × Ø5 × 8 mm
  • Designed for melting into the printed parts using a soldering iron
  •