cover

image (1).jpg

image (2).jpg

image (3).jpg

image (4).jpg

image (5).jpg

image.jpg

plate_1.png

fd85a56caaa614e5.jpg

<ul><li>Support is needed for overhanging parts Tree support at 15% with a 45-degree angle Z offset at 0.3 mm for easy removal support Layer height at 0.2 mm for stability and strength Gyroid pattern as infill at 15% Print speed of the outer wall at 150 mm/s and inner wall at 200 mm/s Seam position set to ‘nearest’ for a smoother surface Print time is 2 hours with the original file size and print settings Might need some sanding for better colour merging  </li></ul>

0.2mm layer, 2 walls, 15% infill

The model was inspired by the Death Eaters portrayed in Harry Potter, seen as followers of Lord Voldemort

Death Eater Mask

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models