Customizable Fancy Coat Hooks

Hello,

Here are some very nice and colorful coat hooks.

The appeal of these hooks is to make your interior more colorful and whimsical 🌈

Indeed, you can customize the color of the hooks, their cover, and even choose a logo to clip on!
The whole family can choose their logo and have their own hook!

The hooks require a kit of 2 screws/dowels/washers: personally, I use yellow kits from the brand "RED HEAD".
Strength? No problem, their design allows for complete confidence to hang your clothes and accessories: tested and approved for several years now ✅

I provide different logos, however, if you want others, don't hesitate to contact me: I will add them for free.

🛠️ASSEMBLY:
1) Drill 2 holes in the wall with a 5mm drill bit. The holes must be 25mm from their centers.
2) Insert the yellow RED HEAD dowel into the drilled hole.
3) Place a 10x4 washer on the 3.5x40 screws
4) Insert the screws/washers into the hook.
5) Screw the hook to the wall.
6) Clip the cover onto the hook to hide the screws.
7) Clip the logo of your choice onto the hook.
8) There you go! Put your accessory on the hook!

⚠️ License Private Use Only

👉 For commercial use: contact@brixodin3d.fr

If you notice any problems, please do not hesitate to contact me to resolve them.

Don't forget to visit my shop: https://boutique.brixodin3d.fr/ !

Happy printing and most importantly, have fun!

Brixodin Performance 3D

Printing advice:  

Print the cover upright without supports at 0.12 or 0.2.
Print the hook on its side with supports from the build plate only at 0.12 or 0.2 with 3 perimeters and a minimum of 25% infill.
The logos can be printed flat without any special conditions.