White Venetian Mask x 3 (XL, L, M)

I offer these masks that can be decorated, ideal for DIY projects, Carnival or masquerade balls.

These masks, often called "blanks", are designed to be used as they are or to be customized with acrylic paint, spray, glitter or other embellishments. They can also be hung and used as home decor.

The style is Baroque/Venetian as they feature intricate relief patterns reminiscent of Baroque style and Venetian tradition.

They are perfect for creating unique masks for theme parties, Halloween or as decorative elements for the home.

I have included 3 print plates with 3 different sizes: XL (large), L (medium), M (small). Select the desired size by deleting the other print plates, or by sending only the selected plate to print. Please note that the woman shown in the photo is wearing size M, while I, with a larger face, wear size XL.

If you have doubts about the size, measure the distance between your eyes with a caliper and then compare it in the slicer using the measurement function (measure the distance between the eyes). In any case, the model can be enlarged or reduced as desired.

Printed in Bambu Lab PLA Jade White. Printing is very easy.

Colors can be changed from the slicer at the time of printing.

Here are the printing times based on size:

Since I printed it vertically to get the maximum possible detail, I added 5 raft layers. The supports come off easily, you'll see.

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then dry it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small precautions, along with many others, determine the success of a good print.

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to experience problems, do not hesitate to contact me, and together we will find solutions in a perfectly collaborative environment. I have made several prints of this object and they all turned out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, wet or poor quality filaments, do not blame me.

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• Wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• Infill 12%

• Grid pattern

• Supports Yes

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration 8000 mm/s

• Outer wall acceleration 8000 mm/s