Divinity Board Game Insert Bottom

This only replaces the bottom layer. It will not save space, but it is better organised. You still need the other cardboard boxes. The bottom space will be tight.

On the green download button press the arrow down and select “Download STL/CAD Files” to get all the files and the fusion CAD files if you want to edit them. The List.zip has the cards listed and what boxes were used for them.

The material used was PETG. Probably use a higher bed temperature like 75°C for better adhesion. Use a textured plate with high adhesion.
Most models have bigger base areas and tend to warp otherwise.
For everything exept the boxes M and L i recommend a brim, especially the gridfinity boxes with the small base will warp a lot.

The status holder has two options: 
(i used the 15 slot option, and have the nemesis contracts in the Haunted/Nemesis medium box)

• 16 slot: Can hold everything, but has a little less space on the right side
• 15 slot: Has more space on the right side, but you can't add the contracts

The Hall of Echoes books has place on the underside of the top layer plastic on the side.
I forgot about the board status tokens from Haunted Keep, you can either leave them in the cardboard box or put them at the bottom of the printed board status token box slots, there is enough space and you don't need them often.
The walls for the boxes M,L are 2mm, so they use more material than probably necessary. The walls could be thinner like a bit above 1mm.

Print profile:

• 0.2 layer, 2 walls 10-15%infill
  Boxes M,L
  Gridfinity box for dices
  Frame
  Talent box
  Status box
• 0.16 layer, 2 walls 10-15%infill
  Gridfinity boxes for tokens
  Board ground status box
  (The 0.16 makes it smoother for the rounded finger slide on the side of the box)

Program used: Autodesk fusion
Gridfinity generator: https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0

Sleeves:
The medium cards are 89mm length. If you use a 89mm sleeve it is probably 91mm long. The medium box has a length of 93mm and should fit that.

My print has some different lengths for the medium boxes because i used bigger sleeves → 96mm instead of 93mm and for non sleeved 90mm instead of 93mm. This version uses 93mm length for every medium box. The layout in the photo should hopefully still work, if not you can leave out the frame, this gets you more space. But then you have to leave out the transparent plastic cover, because it will be harder to put on.

Packing order:
It is probably easier to put the foam/atlas first and on that the transparent plastic cover, this way it is easier to get out. Then put the Hall of Echoes on the side where the top plastic cover has some space underneath. Or don't use the transparent plastic cover.