AMS 2 Pro Power Adapter Holder
Print Profile(3)
Bill of Materials
Description
Boost Me (for free)
𝗬𝗼𝘂𝗿 𝗳𝗿𝗲𝗲 𝗕𝗼𝗼𝘀𝘁 = My design supply pack 📦 Click "𝗙𝗼𝗹𝗹𝗼𝘄" to get more useful models! 👀
To keep the AMS 2 Pro power adapter neatly organized, I designed this bracket that hangs in the gap at the back of the printer. It mounts the adapter securely without any additional parts, and I've incorporated cable management into the design. The overall effect is excellent, keeping your printer tidy! I highly recommend you try it! 👀
🧲 Compatible Printers ( Printers can be mounted on all three sides ):
Printer Models: P2S / P1S / X2D / H2 Series / X1
⚠️Special Note: Currently, two sizes of power adapters have been identified. Please measure your adapter before printing the corresponding model (if there are other sizes of power adapters, please contact me, thank you 🙏):
Size1 = 58x32x139mm
Size2 = 59x36x125mm
Size3 = 61x36x134mm
( hi, I am challenging to create 100 practical models. Follow me to get update reminders. )
💡 Installation Tips:
1. As shown in the image, after inserting the power adapter, first place the cable into the left groove, then wrap the cable counterclockwise. Make sure to press the cable down to the bottom with each wrap so that the wires are tightly packed.
2. After wrapping 3 times, the cable will extend from the right groove, and the length will be just right to plug into the AMS.
- - - New models - - - | |
 |  |
Boost Me (for free)
𝗬𝗼𝘂𝗿 𝗳𝗿𝗲𝗲 𝗕𝗼𝗼𝘀𝘁 = My design supply pack 📦 Click "𝗙𝗼𝗹𝗹𝗼𝘄" to get more useful models! 👀
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (248)