Fully embedded LED tea light holder designed for Moon City 2.0

How to Use:

Print @Kijai's Moon City 2.0 model at 149% scale; the material I used was Bambu Lab PLA Matte;

Prepare LED tea lights with a diameter of 37.5mm (most common models on the market are this size; if unsure, you can ask the seller);

Pry this position to separate the LED tea light's shell from its body;

Keep the body of the LED tea light (left);

Print this model; I used Bambu Lab PETG Basic, as it is smoother and easier to install;

Insert the body of the LED tea light into the shell of this model;

Check if it is completely flush;

Install the assembled unit from the previous step into the body of Moon City 2.0;

Check if it is completely flush;

Enjoy~

Disassembly Tips:

• Pry out the body of the LED tea light using the method above.
• Slowly pry the model out of Moon City 2.0 using the hole in the middle.