Search models, users, collections, and posts
Mould System for Casting Baubles - Silicone Insert
IP Report
Print Profile(3)
Plaster Mould Parts - 0.2mm layer, 2 walls, 15% infill
Designer
2.8 h
1 plate
Silicone Moulds - 0.2mm layer, 2 walls, 15% infill
Designer
2.5 h
1 plate
Pouring Funnel for Slip - 0.2mm layer, 2 walls, 15% infill
Designer
22 min
1 plate
Open in Bambu Studio
Boost
171
515
25
15
341
86
Released
Description
This is a printed mould system to create plaster moulds for slipcasting. The mould system also has separate mould files for casting the hemispherical ornament parts in silicone, to make the slipcasting experience easier.
This print has been scaled to 112% to account for clay shrinkage, which should give a final ornament size of 6cm diameter with most casting slips. If you want it smaller/larger than 6cm, scale every piece of the print including the silicone moulds
www.oldforgecreations.co.uk/blog/slipcast-ornaments-from-a-3d-printed-mould
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (25)