Maul Shadow Lord
Print Profile(1)
Description
Project: Star Wars Maul Shadow Lord.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 1.68mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.1
#68724d PLA BambuLab Matte Dark Green Transmission Distance: 1
#c12e1f PLA BambuLab Basic Red Transmission Distance: 3.8
#f4ee2a PLA BambuLab Basic Yellow Transmission Distance: 5.3
#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 0.7
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Green
At layer #12 (1.04mm) swap to Black
At layer #13 (1.12mm) swap to Red
At layer #18 (1.52mm) swap to Yellow
At layer #20 (1.68mm) swap to Desert Tan for the rest.
Note: I use Bambu PLA for all of my prints. If you substitute different brand filaments, the result might not look the same due to different filament transmission distances.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)