Crystal Rose Chibi Gwen doll

This is the doll form of Crystal Rose Chibi Gwen from Teamfight Tactics, in a sitting pose for easy placement on flat surfaces. AMS is required, and a full filament change is needed. Printable on all printer models. Approximately 16cm at its widest point. It has many thin walls; printing at a reduced size is not recommended as small features are easily lost. It can be enlarged. Even when printed at the original size, wall loss can still easily occur (especially on the white headpiece and skirt parts; adjustments have been made, but trimming may be required after printing). The eyes, blush, and green leaf headpiece require gluing. Please note: Extra care is needed when removing supports. It is recommended to use single-edge nippers and needle-nose pliers together; a straight internal snap ring plier for holes can also be added. Adjusting any parameters is not recommended! If you have time constraints, prioritize modifying sparse infill patterns and infill density. Required colors are: eyes dark red and light blue, blush dark skin tone, mouth dark gray, face and arms light skin tone. The overall printing time is long, and coloring is troublesome. If you're not batch printing and don't have high demands, you can purchase a finished product for over 90 yuan each. Printed models can be used commercially; please do not use the design files commercially. Suggestions for modifications are welcome~