Sunglass Clip for your cars air vent - Free 3D Print Model

Search models, users, collections, and posts

Pengolin Design

Hobby & DIY>Vehicles

IP Report

Print Profile(4)

All

A1 mini

H2C

X1E

P1P

P1S

H2S

P2S

H2D

H2D Pro

X1 Carbon

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

18 min

1 plate

4.8(36)

0.2mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

4.3(3)

0.2mm layer, 2 walls, 15% infill

Designer

17 min

1 plate

4.5(2)

0.2mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

4.0(2)

Open in Bambu Studio

Boost

220

659

812

618

Released

Description

A practical holder for sunglasses to suit the season, which anyone can easily attach to their ventilation system.

There are 2 versions, a small one and a broather one. Both were tested in 4 different cars from different manufacturers.

For me, the small one was more than enough to hold my sunglasses securely without any noise while driving.

If your glasses have a wider frame either use the small clip to hold them in the center of the frame or try out the bigger version to let them slide in all the way.

Prints without support!

If you have any suggestions on how to improve this simple design, or need a remodel to fit your car please contact me :)

Hole size:

Clip v1: 12.5mm x 6mm

Clip v2: 16.5mm x 6mm

sonnenbrillenhalterung

Comment & Rating (48)

@atte3n

Works very well i recommend

@user_568087900

Print Profile

0.2mm layer, 2 walls, 15% infill

perfectly printed in petg hf

Show original

@user_1622757713

Print Profile

0.2mm layer, 2 walls, 15% infill

Very functional, quick to give as a freebie, it's ideal, however it has many sharp edges.. but that can be resolved

Show original

@Somnambule

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2000764606

Print Profile

0.2mm layer, 2 walls, 15% infill

printed really great, but unfortunately the part bends so much in the car with temperature fluctuations that it doesn't hold up Super shame ☹️

The profile uploader has replied

Show original

@Pengolin

This is then due to the material you are using. I would recommend ABS/ASA or PETG. However, there is also PLA that can withstand high temperatures (Polymaker PLA High Temp)

Show original

@Solest82

Print Profile

0.2mm layer, 2 walls, 15% infill

Unfortunately, it doesn't hold in the Renault Modus air vents

The profile uploader has replied

Show original

@Pengolin

What precisely is the issue? Perhaps I can modify the model so it functions within your vehicle as well :)

Show original

@user_2965599370

Print Profile

0.2mm layer, 2 walls, 15% infill

Fit alright but was tough to get the glasses in an out. Minimal filament so not much lost.

@user_4241325759

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in PETG and clips on well

@Serkan1980

Boosted

The best smallest part I have printed so far Thanks

Show original

@MaraMossh

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed from pla. It didn't melt as other things I printed for my car from pla. It's very durable even from pla because glasses aren't that heavy.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Filament Clip

LightBulb

70.9 k

11.6 k

GIF

Air Pressure Tank V2

Patopato_Design

31.8 k

11 k

Fast Funnel with Air outlet

ngprint

46.1 k

6.8 k

car clip for sunglass

Izzodesign74

4.4 k

1 k