Search models, users, collections, and posts

Minimalist Jesus Multipart - NO AMS

AdemilsonModels
Art>Sculptures
IP Report

Print Profile(2)

All
A1
H2D Pro
H2D
H2S
X1 Carbon
X1
X1E
A1 mini
P1P
P2S
H2C
P1S
X2D
A2L
0.16mm layer, 2 walls, 8% infill
0.16mm layer, 2 walls, 8% infill
Designer
9 h
5 plates
4.5(2)
80% different support
80% different support
6.8 h
5 plates
5.0(1)
Open in Bambu Studio
Boost
324
891
27
9
212
103
Released 

Description

Multipart Jesus figure for printing without AMS.


The parts are designed to fit together with some tolerance, and final assembly requires glue.

By using a cold plate or a clean PEI build plate, it is possible to print all parts in the intended orientation; however, feel free to orient them in any way you prefer.

 

I do not recommend a drastic reduction in size, as some parts are small and may not print correctly.

The hands have a tight fit, so if you prefer a looser fit, I suggest reducing their size by 1%.

jesus
religion
image
escultura
multiparte
multipart
religion
image
sculpture
NOAMS

Comment & Rating (27)

(0/1000)
@eudes
That's awesome
Show original
designer
2
Reply
@Jozezin
good afternoon, did you make any changes or print the file as is
Show original
0
Reply
@eudes
Replying to @Jozezin :
I corrected a red support and printed it at 80% of the original size
Show original
0
Reply
@Jozezin
Replying to @eudes :
I downloaded the file which is at 80%, I only found the red part that was a bit bad, the part where the supports are, it needs finishing with sandpaper, did you alter the support?
Show original
0
Reply
@dabelli
I made an assembly
The designer has replied
Show original
designer
2
Reply
@ademilsonmodels
It turned out excellent! Congratulations
Show original
0
Reply
@dabelli
Replying to @ademilsonmodels :
Thank you
Show original
0
Reply
@vieira_085
do you have the stl
Show original
0
Reply
@izadorampavan
the red piece comes loose from the plate at a certain point of the print, I changed the orientation of the piece, reinforced the supports, I will try for the third time
The designer has replied
Show original
0
Reply
@ademilsonmodels
Wash the table with water and detergent, and that will solve your problem
Show original
0
Reply
@izadorampavan
Replying to @ademilsonmodels :
this is the first thing I do on any print
Show original
0
Reply
@ademilsonmodels
Replying to @izadorampavan :
strange. because even lying down the piece is coming off the table. quite a curious fact.
Show original
0
Reply
@SirPrints_a_Lot
Amazing model! 10/10
0
Reply
@user_667168387
Very good!!! I liked it very much
Show original
0
Reply
@izadorampavan
even changing the part position and adding supports there is no way to print three times losing filaments and time
Show original
0
Reply
@eudes
can't the face be separated from the beard
Show original
0
Reply
@viniciustomio
Boosted
It is separated, the face is glued on top of the hair and beard
Show original
designer
1
Reply
@eudes
Replying to @viniciustomio :
thank you, I hadn't noticed
Show original
0
Reply
@sankofa_3d
Boosted
very good!
1
Reply
@user_1203812352
what is the size of the piece
Show original
0
Reply
@Macura3d
Print Profile
0.16mm layer, 2 walls, 8% infill
profile
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Articulated Cute Octopus
Articulated Cute Octopus
3DPrintyi
46.4 k
15.5 k
Bluey multipart no AMS
Bluey multipart no AMS
mika
5.5 k
3.1 k
Frieza Multipart (NO AMS)
Frieza Multipart (NO AMS)
BeardedRhino
1.1 k
931
Minimalist Jesus Ornament
Minimalist Jesus Ornament
Mini Maker Lab
187
172