Table mount Behringer UMC404HD - no drilling

Thank you for your downloads, follows, and suggestions for improvement!

This profile thrives on your support and feedback.

👉 Follow me so you don't miss out on new models

👉 Comment & like if you enjoy a design

👉 Share suggestions for improvement to develop the models further together

This mount allows a Behringer UMC404HD Audio Interface (4-channel) to be attached directly to the tabletop without drilling.
The interface is held securely, is always accessible, and disappears neatly under or at the edge of the desk – ideal for studio, home office, or streaming setups.

Precisely fitted for Behringer UMC404HD (4-channel)

The mount is designed explicitly for the Behringer UMC404HD.
The interface fits snugly into the holder and is:

• laterally guided,
• supported from below,
• and secured from above against slipping.

All connections remain freely accessible, the device sits stably without being clamped or damaged.

Four-part construction with click system

The holder consists of four individual parts:

• 2 outer holders (left & right) for holding the interface and attaching it to the tabletop
• 2 middle bars that define the spacing and precisely fix the interface's position

The middle bars are simply clicked into the outer parts.
No screws, no glue – the system is stable, reproducible, and easy to assemble.

Load-optimized Design & Print Orientation

The construction is intentionally multi-part, so that:

• the layer orientation is load-optimized,
• the clamping forces of the table mount do not act perpendicular to layer adhesion,
• and high long-term stability is ensured.

The table clamp, in particular, is designed to be mechanically loaded sensibly in the print direction.

Print Instructions (important)

⚠️ Please use the included print profile!
All relevant settings are already correctly stored there.

• Layer height: according to profile
• Wall thickness:
  • 4 layers in the table mount area (critical!)
• Material: PLA (recommended)
• Support: according to profile (if activated)
• Orientation: as specified in the profile

Only this way can the necessary stiffness and holding force on the tabletop be ensured.

Features at a glance

• Mounting without drilling
• Specifically for Behringer UMC404HD (4-channel)
• Four-part click system
• Stable hold on the tabletop
• Load-optimized layer orientation
• All connections freely accessible
• Minimalist, functional design

💡 Ideas, errors, or suggestions for improvement?

Write it in the comments – together it will be better.

⭐ Support through Like & Follow motivates for new projects

🔧 Models are developed close to practice, feedback is actively incorporated