P1S/P1P Overture TPU Config File

Hello!

The 3mf of this benchy can be imported to either Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as potentially optimal profiles for TPU printing, specifically Overture (as it is a low entry price for TPU). As a breakdown:

• Filament Profile: Overture TPU - Black: This config is for the filament. The print shown above is done with recently opened TPU from Overture (like the morning before posting this), so if you get different results with blobs/underextruding, dry your filament.
• Print Profile: 0.20mm Standard - TPU: This config is for all the process settings. Basically, the main thing is that the printer will be printing slow. It needs to to be able to print TPU reliably.

This print was made with only the part cooling fan. If printing with a P1S, just make sure to open either your top cover or the front door to allow for ventilation. I also am running stock everything else, so whatever machine you got out of the box, this profile should be close enough to work.

Hope this works!

*Obligatory benchy included for print model