Rotboxdriver

0.08mm layer, 2 walls, 100% infill

in the print profile find the description 

markfnc

Just point the arrow of the mouse at the print profile click on EXPAND

Shadow19

what colors are needed and what layers are the color swaps?


D!MAN#300

user_3488097554

Anthony Gons

sa rend bien mais en le regardant de loin, de près celà fait pas si propre.
mais bien dans l'ensemble quand même 

It renders well, but up close it doesn't look quite as clean from a distance, however it is quite good overall

ninijk

cover

1709740287844_1f5ee1fb-87fe-4151-a521-a66f7d63950a.jpg

plate_1.png

1709740287859_644ac68d-49f2-47b3-9e68-7510c56cadf4.webp

plate_1.webp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:     PLA PolyTerra Charcoal Black Transmission Distance: 0.3     PLA PolyTerra Lava Red Transmission Distance: 1     PLA PolyTerra Fossil Grey Transmission Distance: 2.2     PLA azurefilm White Transmission Distance: 3.7Swap Instructions:     Start with Charcoal Black     At layer #7 (0.64mm) swap to Lava Red     At layer #10 (0.88mm) swap to Fossil Grey     At layer #11 (0.96mm) swap to White for the rest. Profile not quite linear near the wheels due to background removal

hueforge pecco bagnaiaworld champion

Print Profile(1)

Description

Comment & Rating (10)

License

Related Models

pecco bagnaia motogp

Print Profile(1)

Description

Comment & Rating (10)

License

Related Models