Search models, users, collections, and posts
BMCU 370C AMS
IP Report
GIF
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
12.7 h
6 plates
Open in Bambu Studio
Boost
12
31
3
0
13
0
Released
Description
Content has been automatically translated.
I designed this structure which is similar to the original AMS adapted for the BMCU 370C
I should mention that I printed and assembled the BMCU myself, but it is based on the “BMCU-Hall Sensor Version-370-Optimized Casing”
The tubes are 8mm in diameter and 38cm long, and I salvaged them from an old 3D printer, but they can be found online The cables connecting the channels need to be extended or bought new (the connector is called PH 2.0 10pin)
You will also need 16 screws, I used those included in the kit (m2*8 countersunk self-tapping screw)
What you see in the photos differs slightly from the design (the outer left and right parts are joined, the PCB case is a single piece, and the “feet” are all the same; in my version, I repurposed them along with the tubes)
The 2 long pieces in plate 6 were used to support the structure they can also be used to separate the spools and prevent them from coming out of the bushings
The bushings work but I would like to give them more friction with the spool
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)