HP ProDesk FlexIO network adapter

I made this adapter to securely mount Intel-based 2.5Gb network cards in my HP Prodesk 400 Minis. Having the RJ45 on the outside of the case isn't the prettiest, but with the SATA SSD bracket installed there isn't enough room to fit everything comfortably inside (I broke off a connector trying this…). 

If you don't have a SATA SSD bracket inside your ProDesk, I recommend angrygriggin's model on Printables; it fits entirely inside the case.

Compatibility:

Tested successfully with:

HP ProDesk 400 G4
HP ProDesk 400 G5

and

M.2 A+E key Intel i226v 2.5Gb/s network adapter

Other combinations -may- work, let me know if they do!

--

Printing/materials:

I printed mine with Polymaker HT-PLA. 

Regular PLA may become soft due to the temperature. PETG or ABS should also work (I recommend scaling up to 100.5% when printing ABS).