The Plant Clip V2 - Snap-Hinge Design No Supports! - Free 3D Print Model

Search models, users, collections, and posts

JH3D

Household>Decor

IP Report

GIF

Print Profile(2)

All

P1S

X1 Carbon

P2S

H2C

H2D

H2D Pro

A1 mini

H2S

X1E

P1P

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

16 min

1 plate

4.9(22)

Screw version (0.16mm layer, 2 walls, 15% infill)

28 min

1 plate

Open in Bambu Studio

Boost

369

1479

594

491

Released

Description

This is the V2 evolution of my most downloaded plant clip. While V1 had a separate lid, V2 features a clever two-part design that snaps together securely after printing to create a functional hinged clip. Once assembled, it acts as one solid piece—no more lost lids!

Key Features

Smart Assembly: Prints as two separate parts (base + cover) that click together securely to form a permanent hinge.
Support-Free Printing: Designed specifically to print perfectly without any supports, saving you time and material.
Ultra-Minimalist: Uses very little filament and prints fast. Despite its light weight, the snap-lock is sturdy and holds vines securely.

Boost Me (for free)

Happy with the clip? A Boost is always appreciated! It helps me keep designing new stuff for free. ✌️

Got ideas? I’m always open to suggestions! If you have ideas for upgrades or new shapes, let me know in the comments.

Comment & Rating (27)

@kaju666

Boosted

Good model :) I added profile hole for small screw Printed in PETG as PLA was to fragile

@mldk

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

such a clever idea, this is probably 4th or 5th version of wall clips that I am using and it’s best by far!

@BartBartDG

Print Profile

0.16mm layer, 2 walls, 15% infill

very helpful 😁

@user_556966095

Thanks for this, my friend, but unfortunately it's only suitable for walls; it can't hold plants on the ceiling. If possible, could you develop a ceiling-mounted version with a wide base like this model but a narrower top and a way to snap it in place to prevent the plant from falling out? 🤝🏻

@user_3022487074

Great design, but the file appears to be corrupted. The top section has hollow walls on the hinge side. Any chance you could re-upload it?

The designer has replied

@JH3D_designs

I'll check it out. thanks for noticing.

@user_98540063

Print Profile

0.16mm layer, 2 walls, 15% infill

Thanks for this great idea 👍 Prints and assembles without any problems

Show original

@user_1969262521

Print Profile

0.16mm layer, 2 walls, 15% infill

Works good

@user_3749097611

Print Profile

0.16mm layer, 2 walls, 15% infill

Great, that's just what I was missing. The next plants can come

Show original

@traceym.duffy

Print Profile

0.16mm layer, 2 walls, 15% infill

Love them! Printed quick and clean, and snapped together without issue.

@onurbozkurt

Print Profile

0.16mm layer, 2 walls, 15% infill

no issue at all. perfect

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.