Flatforge and Hueforge - Japan Wave - Kanagawa

Print at 100% infill with a layer height of 0.08 mm and a base layer height of 0.16 mm.

Swap Instructions for Hueforge:

• Start with black – Transmission Distance: 0.1
• At layer #8 (0.72 mm), swap to dark blue – Transmission Distance: 1.8
• At layer #13 (1.12 mm), swap to electric blue – Transmission Distance: 3.3
• At layer #21 (1.76 mm), swap to turquoise – Transmission Distance: 2.3
• At layer #22 (1.84 mm), swap to white – Transmission Distance: 7.9 (for the remainder of the print)

Information for FlatForge:

Swap Instructions:

• You do not set layer swaps in the slicer. Instead, each color slider is represented by a separate STL file.
• Each file is named with the filament color at the end to make it easy to assign in the slicer.
• Load all STLs at once; your slicer will ask if this is a multi-part model. Select Yes.
• Load your filaments, then assign them in the Object View tab by clicking on the colored box
  and either pressing the number of the filament or clicking again and selecting it from the dropdown menu.

FlatForge Printing Instructions:

• FlatForge prints require automatic filament swapping. There can be as many swaps per layer as there are sliders.

• If you have selected Double-Sided or Face Down, the model is already rotated face down,
  and a transparent layer with the thickness of your base layer is added to the bottom.