Wolly Mammoth Skeleton

PLEASE READ BEFORE PRINTING

I found this model online, and after many print fails i have completely overhauled the print settings and some of the key elements to add strength and better print quality. Design credit goes to the designer for taking the museum scan and creating it into assemblable parts. I highly suggest a super tac cool plate when printing. I use Bambu Matte desert tan and bone white (tusks), and PLA basic for the base plate. For added stregnth a drop of super glue can aid in holding a few parts together, but not always required, depending on filiment used

The source file for this model is the 3D scan of a woolly mammoth skeleton from the Smithsonian Institution National Museum of Natural History site at: https://3d.si.edu/object/3d/mammuthus-primigenius-blumbach:341c96cd-f967-4540-8ed1-d3fc56d31f12 
The scale of the .STL files is 1:10.

I separated the original model into printable pieces and added snap together features to make it easier to assemble. I also added a two-piece to make the assembled model stand properly and improve strength. The model in the pictures did not have snap features so gluing it together was difficult. I have not tested all of the snap fits, so please let me know of any issues if you build it.