Seether - Holding Onto Strings Better Left to Fray
Print Profile(1)
Description
Boost Me (for free)
These HueForge album covers are something I’m building in the little free time I have outside long work weeks. I may not post often, but I care a lot about each piece. If you enjoy the work, a boost really shows love and helps me stay inspired.
Seether - Holding Onto Strings Better Left to Fray - Album Art Hueforge
Project: strings.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.4x133.4mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA BambuLab Basic Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Sunflower Yellow
Border Only Colors from here until the end.
At layer #20 (1.68mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)