Modular Bike Gear Wall System - Free 3D Print Model

Search models, users, collections, and posts

71_North

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

H2C

X1 Carbon

P1P

H2S

P2S

H2D

H2D Pro

X1E

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

6.7 h

7 plates

5.0(12)

Open in Bambu Studio

Boost

112

415

261

135

Released

Bill of Materials

List other parts

4x20 Schrauben x 2:

Description

Content has been automatically translated.

Show original

Modular wall system for stylish storage of bicycle equipment. Inspired by the tons Rack System.

The set combines helmet, glasses, and shoe holders, as well as a storage compartment for accessories – minimalist, space-saving, and ideal for your home bike setup.

Description

This modular bike gear wall system was developed to organize your essential bicycle equipment neatly, within reach, and stylishly in one place.

All components are mounted on a 25 mm round wood dowel and can be flexibly arranged – depending on need and available space.

Included Modules

✔ Helmet Holder

The helmet holder securely carries your bicycle helmet and can alternatively be used for accessories such as lights or small items that attach to the handlebars.

✔ Bicycle Glasses Holder

Specially shaped for sports and cycling glasses. The glasses hang freely, without pressure on lenses or temples.

✔ Accessory Storage Compartment

Practical storage for cycling computers (e.g., Garmin), charging cases, keys, or care products.

✔ Shoe Holder

Hanging storage for cycling shoes – ventilated, space-saving, and cleanly separated from the rest of the equipment.

✔ Wall Mount

The wall mount was designed to require only a single drill hole in the wall. It securely supports the round wood dowel and minimizes installation effort.

Required additional materials

25 mm round wood dowel
- Minimum length 50cm
- 60cm in the illustration
Screw & dowel suitable for the wall
x2 Wood screws (4x20mm)

Assembly & Customization

All modules are placed onto the round wood dowel and can be freely positioned
Height and order of elements are individually adjustable
Ideal for hallway, home gym, pain cave, or garage

Comment & Rating (20)

@Spider6662k

Print Profile

0.2mm layer, 2 walls, 15% infill

Awesome! Thank you, I made it 12% bigger to fit my broomstick

Show original

@heylao

Boosted

are the holders only being held by friction? any suggestions on what to use so it doesnt slide down? also i saw theres a plate with a 10degree fuzz. Whats that for? sorry im new to this.

The designer has replied

@71_North

Thank you for the boost! Yes they hold by friction. They are designed a bit tighter than needed. My ones hold very good. Only the shoe Holder need support. That’s why I included a separate ring, which has a screw to hold in place. What diameter of dowel are you using? As we have mm in Europe not inch, this could one issue.

@heylao

Boosted

Replying to @71_North :

ah great. will be buying a 1" dowel. also wanted to ask about that plate with the 10degree holder . what did you meant for that to be used at?

@71_North

Replying to @heylao :

Try it as we have 25mm and an inch is slightly bigger but it should work. The angled Version is for a Desk Standing Version. But didn't finished that yet.

@Runningman

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in black PETG on the Bambu H2C, it looks great

Show original

@user_1340136642

Hello, thank you very much for the great model. However, I am looking for the hanger for the shoe hooks in your file. Is this not included?

The designer has replied

Show original

@71_North

Hi, thank you very much! I completely forgot to add it :). I have updated the file Please remember to print the support with it, it needs the screwed-in ring, otherwise they will slide down ;)

Show original

@user_1243062005

Boosted

Super System, everything fits

Show original

@user_2925123938

Print Profile

0.2mm layer, 2 walls, 15% infill

very good print quality, absolutely recommended

Show original

@user_865801045

Print Profile

0.2mm layer, 2 walls, 15% infill

printed in petg-cf it's beautiful and very robust

Show original

@user_1683731851

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect and functional

Show original

@MichaelRe

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_867568180

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.