davnici

cover

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

plate_1.png

5ccfaf463593fa3b.jpg

6.PNG

0.16mm layer, 3 walls, 25% infill

v2.jpg

Variable Stop

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>📐 Frässchablone für Möbelbänder – 10 mm Kopierring / 6 mm Fräser</h3>Diese Frässchablone wurde für Oberfräsen mit 10 mm Kopierring in Kombination mit einem 6 mm Schaftfräser entwickelt. Sie ist passend für Möbelbänder von Häfele und ermöglicht präzise, wiederholgenaue Ausfräsungen.<h4>🔧 Fräsmaß</h4><ul><li>Ausfräsung ab Kante: 50 × 16 mm</li><li>Frästiefe: bis max. 3 mm</li></ul><h4>🪵 Anwendung</h4><ul><li>Ohne montierten Anschlag ist die Schablone für Türen und Seiten beliebiger Materialstärke geeignet.</li><li>Mit montiertem Anschlag (für 19 mm Plattenstärke) lässt sich die Schablone sicher und wiederholgenau auf die Kante aufstecken.</li><li>Durch die Einkerbung lässt sich die Schablone präzise am einer Markierung Anlegen</li></ul><h4>🧩 Befestigung &amp; Zubehör</h4><ul><li>Zur Montage des Anschlags werden benötigt:<ul><li>2× M3 × 4 mm Einschmelzgewinde</li><li>2× M3 × 10 mm Senkkopfschrauben</li></ul></li><li>Integrierte Laschen ermöglichen das Fixieren der Schablone mit Schraubzwingen während des Fräsens.</li></ul><h4>🖨️ Druckhinweise</h4><ul><li>Material: PLA+, PETG oder ABS empfohlen</li><li>Druckplatte: Bambu Smooth PEI Plate</li><li>Infill: 20–30 %</li><li>Perimeter: ≥ 3&nbsp;</li></ul>Vor dem Einsatz Passung an einem Teststück prüfen<h4>⚠️ Hinweis</h4>Die Nutzung erfolgt auf eigene Verantwortung. Vor Serienanwendungen unbedingt eine Probefräsung durchführen.&nbsp;&nbsp;&nbsp;&nbsp;📐 Routing Template for Concealed Hinges – 10 mm Guide Bushing / 6 mm Router BitThis routing template is designed for plunge routers using a 10 mm guide bushing in combination with a 6 mm shank router bit. It is compatible with Häfele concealed hinges and allows for precise, repeatable routing results.🔧 Routing Dimensions<ul><li>Cut-out offset from edge: 50 × 16 mm</li><li>Routing depth: up to max. 3 mm</li></ul>🪵 ApplicationWhen used without the mounted stop, the template is suitable for doors and panels of any material thickness.With the mounted stop (for 19 mm panel thickness), the template can be securely and repeatably positioned on the edge of the workpiece.The integrated notch allows precise alignment of the template with a layout mark.🧩 Mounting &amp; HardwareThe following components are required to mount the stop:<ul><li>2× M3 × 4 mm heat-set threaded inserts</li><li>2× M3 × 10 mm countersunk screws</li></ul>Integrated tabs allow the template to be secured with clamps during routing.🖨️ 3D Printing Recommendations<ul><li>Material: PLA+, PETG, or ABS recommended</li><li>Build plate: Bambu Smooth PEI Plate</li><li>Infill: 20–30 %</li><li>Perimeters: ≥ 3</li></ul>Check the fit on a test piece before use.&nbsp;⚠️ DisclaimerUse at your own risk. Always perform a test routing operation before production use.&nbsp;&nbsp;&nbsp;&nbsp;

<h3>📐 Routing Template for Concealed Hinges – 10 mm Guide Bushing / 6 mm Router Bit</h3>This routing template is designed for plunge routers with a 10 mm guide bushing in combination with a 6 mm shank router bit. It is compatible with Häfele concealed hinges and allows for precise, repeatable routing results.<h4>🔧 Routing Dimensions</h4><ul><li>Cut-out offset from edge: 50 × 16 mm</li><li>Routing depth: up to max. 3 mm</li></ul><h4>🪵 Application</h4><ul><li>When used without the mounted stop, the template is suitable for doors and panels of any material thickness.</li><li>With the mounted stop (for 19 mm panel thickness), the template can be securely and repeatably positioned on the edge of the workpiece.</li><li>The integrated notch allows precise alignment of the template with a layout mark.</li></ul><h4>🧩 Mounting &amp; Hardware</h4><ul><li>The following components are required to mount the stop:<ul><li>2× M3 × 4 mm heat-set threaded inserts</li><li>2× M3 × 10 mm countersunk screws</li></ul></li><li>Integrated tabs allow the template to be secured with clamps during routing.</li></ul><h4>🖨️ 3D Printing Recommendations</h4><ul><li>Material: PLA+, PETG, or ABS recommended</li><li>Build plate: Bambu Smooth PEI Plate</li><li>Infill: 20–30 %</li><li>Perimeters: ≥ 3</li></ul>Check the fit on a test piece before use.&nbsp;<h4>⚠️ Disclaimer</h4>Use at your own risk. Always perform a test routing operation before production use.&nbsp;&nbsp;&nbsp;&nbsp;

Routing Template for Concealed Hinges

ASIA

Print Profile(2)

Description

📐 Routing Template for Concealed Hinges – 10 mm Guide Bushing / 6 mm Router Bit

🔧 Routing Dimensions

🪵 Application

🧩 Mounting & Hardware

🖨️ 3D Printing Recommendations

⚠️ Disclaimer

Comment & Rating (1)

License

Related Models