Swordmaster 2D art Hueforge
Print Profile(1)
Description
Boost Me (for free)
Each piece is a carefully layered composition that creates an illusion of depth, light, and emotion. Designed to be viewed, felt, and experienced — not just printed.
→ Link to my collection of works ←
******************************************************************************************
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 166.67x250mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 2.16mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 4
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Jade White
At layer #18 (1.52mm) swap to BambuLab Green
At layer #22 (1.84mm) swap to Yellow for the rest.
******************************************************************************************
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)