Search models, users, collections, and posts
Rectangular Airgun Suppressor .22 (1/2"-28 UNEF)
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 25% infill
Designer
4.6 h
1 plate
Open in Bambu Studio
Boost
59
136
10
0
101
60
Released
Description
A simple rectangular airgun moderator for .177 up to .22. It consists of three pieces and can be easily printed without supports. It has 1/2"-28 UNEF threads to fit most airguns. On request I can add more thread options. Designed to be printed with the front facing the build plate, and the threads pointing up. The inner part is a bit thin and tall, so I recommend a brim.
Due to the three part assembly, it can be easily adjusted for every gun/thread to fit at the right angle. Simply loosen the cap, turn the shell and fasten with a 10mm hex hey or with the included tool.
Dimensions: 34x47.5x165mm
Let me know if there is anything wrong, or if you have any questions.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (10)