Bunny Lamp - Free 3D Print Model

Search models, users, collections, and posts

NUKDDD

Household>Decor

IP Report

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D Pro

H2C

P2S

H2D

H2S

X2D

A2L

No threads bunny print by object set 0.2mm layer, 2 walls, 5% infill

Designer

5.3 h

1 plate

5.0(178)

a1 mini threaded set 0.2mm layer, 2 walls, 15% infill

Designer

5.1 h

2 plates

4.9(135)

Threaded Bunny Set 0.2mm layer, 2 walls, 15% infill

Designer

5.4 h

1 plate

4.9(437)

a1 mini no threads set 0.2mm layer, 2 walls, 5% infill

Designer

4.8 h

2 plates

4.9(91)

Click to see more

Open in Bambu Studio

Boost

3316

6985

993

658

9.7 k

7.3 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Halloween Ghost Night Light

Bambu Filaments

Select all

Matte Ivory White (11100) / Refill / 1kg

Description

Boost Me (for free)

Your boosts help me continue to make designs available for free! Give me a like and follow if you enjoy my designs!

Easter Bunny Eggs evolves! Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊

Commercial rights available for all my designs at https://www.patreon.com/NUKDDD

Printed with pastel PLA

These lil bunnies busted out of their shell and now ready to mingle. A small bit of supports this time, comes off easily. You can support me by using my affiliate link to purchase the LED candle I purchased in my video and photos. I may earn a small commission.

These are 2 versions here:

1 with threads that will thread into the feet, it also fit the feet from my other upload (tea light versions) if you have printed them already.

The other one you can just drop it in, no threads. Some people might find that more convenient.

Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Membership

If you'd like to sell prints of my designs hosted here MakerWorld, you can click on the join button, but if you're looking to sell prints and access exclusive models not available on MakerWorld, check out my Patreon at patreon.com/NUKDDD

Join

Comment & Rating (993)

@Crome

Print Profile

Threaded Bunny Set 0.2mm layer, 2 walls, 15% infill

All of your parts have been excellent! Load & print, no problems! There great gifts for my sons preschool class. Thank you for making great prints that allow us to just enjoy the end product. Only issue is the fuzzy skin isn’t turned on when I load them but I ended up playing with the numbers to get the nest to look a little more “branchy” & the bunnies fuzzy looking. Starting some big eggs & stumpies tonight, can’t wait to see how they turn out!

(Edited)

The profile uploader has replied

@NUKDDD

Hi Chris, thanks for the review and rating and makes! =) I loaded up the this particular profile and fuzzy skin is turned on. Could it be another print profile you're referring to? Pls let me know and I'll investigate =)

@foxx1357

Hello where can we find the setting for the rabbit feet skin thank you

Show original

@NUKDDD

Replying to @foxx1357 :

I updated all my print profiles to double make sure that fuzzy skin is turned on for the appropriate part. The setting is under the “others” tab, scroll down and choose “contour only” for fuzzy skin

@painisintheanus

Looks fantastic! Printed top in clear PETG and bottom in White ABS 😁 The profiles are 100% top notch 👌🏻

(Edited)

The designer has replied

@NUKDDD

nice! I haven’t tried printing petg or abs yet. you’re welcome to post your print profiles here 🙂

@painisintheanus

Replying to @NUKDDD :

Honestly just used your designer profile with bambu studios profiles for Generic PETG (Giantarm transparent PETG) and the Bambu ABS (Bambu White ABS) :) But i printed both seperately. Came out 100% error free, what really kinda surprised me, as PETG and ABS usually tend to string more. But in this case, even the PETG printed perfectly without significant strings between the small holes on the bunny. That said, I use silikat boxes in my ams to get the humidity below 10%, this also eliminated a lot of issues for me.

(Edited)

@NUKDDD

Replying to @painisintheanus :

yeah, these bambu machines are quite amazing, I kept my x1c stock since I got it, no issues at all, except the occasional filament breaking, and that’s not the printer’s fault. I didn’t even print a “poop” Shute haha

@Dwilhoit0124

Random question, are the bunnies supposed to print w/ supports? The outside supports aren't an issue, but the ones on the inside can be tricky to remove. I don't currently have supports enabled in Bambu Slicer, but no matter what setting I use, they always generate. It's not a deal breaker and I'm still going to print them but I was just curious because I haven't seen anyone else comment about it. I'm using a Pastel gradient PLA and they look awesome! I'll update with pics when I am done!

The designer has replied

@NUKDDD

it doesn't require support, don't enable it.

@Dwilhoit0124

Replying to @NUKDDD :

I don't have them enabled and they are still there, currently printing as we speak

@Dwilhoit0124

Replying to @NUKDDD :

I just looked it over again and for some reason, the no threads version bunny had supports enabled and the feet didn't so it made it look like they weren't enabled at all. I might have done that, but I downloaded the file from this page a second time just to make sure I had a clean one, so it might be worth double checking. I'm sure it was operator error on my end though haha. Thanks for clarifiying

@Ivin3DCustoms

Print Profile

a1 mini threaded set 0.2mm layer, 2 walls, 15% infill

flawless printing

@user_3547876559

hi, what kind of light did you use? thank you

@marek.wydysz

Boosted

Print Profile

Threaded Bunny Set 0.2mm layer, 2 walls, 15% infill

I'm just getting started... I plan to print 20 🤝

The profile uploader has replied

@NUKDDD

Multiply like real rabbits! 😊

(Edited)

@user_4003751050

Print Profile

Threaded Bunny Set 0.2mm layer, 2 walls, 15% infill

Perfect print ! Thank you! x1c, pei Platz, bambu basic and matte PLA

(Edited)

The profile uploader has replied

@NUKDDD

Thanks for the being the first to post your make! =3

@hobnobrob2000

Boosted

Print Profile

a1 mini no threads set 0.2mm layer, 2 walls, 5% infill

I love this model but I had an issue with the fit. The fuzzy skin on the bottom of the rabbit makes it too tight to fit the base. As I've never used fuzzy skin before I'm not sure if to print the top slightly undersize, or if to try a modifier to stop the effect at the bottom of the rabbit. This is something else I've never tried. I'm open to suggestions, thanks 🙏🏻

The profile uploader has replied

@NUKDDD

the bunny itself should not have fuzzy skin turned on

@hobnobrob2000

Boosted

Replying to @NUKDDD :

It was already turned on. I downloaded it 3 times and each time the same. I sorted my current problem out by reprinting the feet at 101% and then the fuzzy bunny went straight in. I also modified the file to not include fuzzy skin on the first 52 layers, and my second print went straight in to the normal feet print. I personally think the bunny looks great with fuzzy skin, so now I have 2 options 👌🏻

@NUKDDD

Replying to @hobnobrob2000 :

that's great you got it sorted and thanks for your comment and I've fixed the profile =)

(Edited)

@Liviulmu

Boosted

Just finished the top part, looks amazing. boosted only 1 token bc I'm poor. Thanks!

The designer has replied

@NUKDDD

haha no worries, I appreciate it 👍

@PrintCaveDesign

Boosted

Print Profile

Threaded Bunny Set 0.2mm layer, 2 walls, 15% infill

I colored it on the colors of my country and I’m gifting it to my grandma (as you can see in this photo one of them failed it was from my side, but I cut the head and made it into a pen or brush holder)

The profile uploader has replied

@NUKDDD

looks amazing! even the failed ones👍

@Iulian3D

Boosted

Print Profile

Threaded Bunny Set 0.2mm layer, 2 walls, 15% infill

Great model

The profile uploader has replied

@NUKDDD

thanks!

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Easter Bunny Egg Lamp

NUKDDD

19.4 k

6.2 k

Bunny Lamp

3D URSA

808

561

Easter Bunny Egg Lamp

Fresh_Design

1.4 k

695

bunny lamp

3D Liii