F1 1:43 Franco Colapinto Display Stand

Introduction

This is my second design uploaded to MakerWorld and I dedicate it to the boy Franco Colapinto. I created this stand to give 1:43 scale Formula 1 cars a clean and immersive display, simulating a track-like presentation. The simple details and the side tilt angle provide a unique look, making it perfect as a decorative display piece

Features

• The stand rotates 360° to select the desired viewing orientation. 
• The car stand prints in approximately 2 hours and 30 minutes. 
• Uses only 3 filament colors. 
• Total weight less than 60 grams. 
• No supports required (brim can be enabled if needed). 
• Dimensions: 165 × 93 × 50 mm with the base assembled. 
• Uses the original screw included with the die-cast car. 
• Quick and easy installation. 
• Recommended print profile included; parameters can be adjusted to suit your printer. 
• Compatible with most Bburago 1:43 scale F1 models.

• 

  ⚠️Recommended Print Parameters 

  The included profile uses basic and reliable settings. It is recommended to maintain the provided color print order (see attached image on the model page) for best results. Users can freely modify parameters if necessary

• 

  ⚙️Assembly Instructions 

  1 Insert the screw into the support piece. 

  2 Attach the support to the base. 

  3 Leave a small portion of the screw tip exposed to align with the car's mounting hole. 

  4 Secure the car using the same screw. 

  5 Rotate the stand to choose the preferred tilt orientation.

• 

  Thank you for your support. If you print this model, feel free to share your result and leave your comments. Your suggestions help me improve this design and guide my future creations.