Gohan Transforms Chromalink

Made this with Hueforge for Superseaslug's Chromalink found below:

https://makerworld.com/en/models/654454-chromalink-the-modular-hueforge-display-system?from=search#profileId-581403

***I designed this in Huforge with the chromalink system in mind, Please check out their system for the files that this prints on to.***

Follow the chromalink directions to print using this STL. I recommend looking at the slice and adding a pause on the last couple of layers of white, and stopping the print at the layer you like the look of. This will clean up some of the white that prints on the faces. I stopped the print at layer 38.

Directions from Hueforge below:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm

The Model is 217.16x250mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #d1d3d5 PLA BambuLab Basic Light Gray  Transmission Distance: 1.7
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.64mm) swap to Dark Gray
    At layer #16 (1.28mm) swap to Light Gray
    At layer #18 (1.44mm) swap to Jade White for the rest.