Wheel - Stanley Tool Box (150mm Diameter, 50 Gal)
Print Profile(1)
Description
This is a replacement wheel for the Stanley 23 in. 50 Gallon Mobile Tool Box (ProMobile JobChest)
It is recommended to use PETG or harder plastic and NOT PLA for durability purposes.
In case, you want to try to re-purpose this wheel for another application:
- This is a 150 mm diameter by 50 mm Wheel
- The metal rod that goes into this wheel is 9.5 mm in diameter. The diameter of the hole in this model is 12.20 mm to account for shrinkage.
- See pictures for all dimensions
Installation Instructions:
You will print the main wheel and 2 half-cylinders. NO GLUE NEEDED
- Remove Supports
- Place one half-cylinder into the back center hole of the main wheel. It should be a tight fit
- Place the second half-cylinder in the center hole. You may need to use a hammer to tap it the rest of the way in.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)