Washington Redskins Oversized Hype Chain

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

This is a 3D-printed oversized hype chain medallion featuring the classic Washington Redskins logo (team name since retired and updated to the Washington Commanders).

The medallion is designed as a bold, statement-piece print and measures approximately 218 mm × 250 mm × 9 mm thick, making it perfect for display, cosplay, fan décor, or just having fun with a classic football aesthetic.

🔗 Chain Links Included

The chain links are included on Plate #2 and are not my original design. They were created by Billrobland and are provided here under their original license for convenience.

Original chain link model:
👉 https://makerworld.com/en/models/25960-chain-links-for-logo-s-with-video#profileId-22348

🖨️ Printing Notes

• Designed for multi-color printing (AMS friendly)
• No supports required
• Scale as desired for wall display or wearable novelty use
• Colors I used: Bambu PLA Basic; Black, Jade White, Maroon Red, Sunflower Yellow.

⚠️ Disclaimer

This model is fan-made and intended for personal use only. It is not affiliated with, endorsed by, or licensed by the NFL or any team organization. Please respect trademark and licensing rules when using or sharing this model.

If you print one, feel free to share your make — I’d love to see different color combos or scaling ideas!

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.