Lamda Labs QX-3 miniature Keychain (no AMS)

- Info -

This is a miniature LamdaLabs QX3 model for a Keychain. The model measures approx. 30x30x60 mm, so it is more like a charm for your Vinyl-Bag or something like that.

Specialties:

• 🚫 No AMS
• 🧪 only small amount of glue
• 💍 only Key-Ring needed, no screws

- Parts Overview -

For it to be able to print without an AMS, it assembles from four main components:

	Number	Quantity	Part	Color(s)	Specialty
	1	1 pcs.	Main Body	Black Recommended: - Matte Black PLA	- Pause to insert the whole assembly!	(notice Main Body prints hollow, pre-assembly from Parts 2, 3 & 4 is inserted, print is resumed)
	2	1 pcs.	Insert Body	White & Black Recommended: - Matte Black PLA - Matte White PLA	- Color-Change from Black to White!	(notice the Black starting-Layers)
	3	1 pcs.	Structure	Gray Recommended: - Matte Gray PLA	-	-
	4	2 pcs.	Horn	Black Recommended: - Matte Black PLA	Very Small Footprint! - Keep Plate clean or add brim.	-

- Assembly Overview -

As shown below:

1st, the Structure (Part 3, gray) inserts from below into the Insert Body (Part 1, mainly White) from below (add glue)

2nd, the Horns (Part 4, black, 2 pcs.) then inserts from the front to the Structure (Part 3, gray) (add glue)

3rd, all necessary parts now hold together, the final step is to start printing the Main Body (Part 1, black).

It will pause when almost finished, waiting for you to insert this assembly. Add glue to prevent rattling.

Also, press down firmly when printer is paused to prevent the nozzle from hitting an knocking over the print.

- Happy Printing! -