Interior WRümh Dining Car Primex 4014

Interior for the Primex 4014 Dining Car

While Märklin delivered the dining car (4054) with an interior, the Primex car (4014) was delivered without one. To upgrade the car, I developed an interior.

The interior is divided into segments so that they can be inserted through the open car roof.

No gluing or opening of the car floor required!

Because cars without interiors have a wall with a recess in the middle of the car, please pay attention to the cutout in one of the compartments.

Dining area: Starting from the middle wall, two table segments (recess!) are inserted first. Then two from the end of the car and the remaining two in between.

Bar/Kitchen: Starting from the middle wall, insert the segment with the bar stools, then the bar/counter. Then from the end of the car, the large kitchen modules, and then the small one.

For the high tables, a hook must be placed on the supports. The supports are problematic to detach.

The tables need to be glued in. This allows you to first decorate the car with figures (TT is best suited for this).

Caution, delicate parts!
Only suitable for vehicle 4014 with a length of 24 cm!