Asus ROG Flow Z13 Power Supply Armor Case

🌟 Like & Collect to keep it close! If this model made you smile or saved you time, hit that 👍 and ⭐ so it’s always just a click away!

🎮 ROG Flow Z13 Power Supply Armor - Premium 3D Printed Protection Case ⚡
 

Why I designed this:
We've all been there - your laptop is on the desk, but the nearest outlet is across the room. Your precious 130W power brick ends up on the floor, getting kicked, stepped on, and collecting dust. Not anymore! 💪
 

The Problem: The ROG Flow Z13 (2023) deserves better than leaving its power supply vulnerable on the floor. These bricks are expensive to replace, and daily abuse takes its toll - scuffed surfaces, damaged cables, and eventually, failure. Plus, that flexible USB-C cable attachment is particularly vulnerable to stress and damage.
 

The Solution: A custom-designed protective case that combines form and function:

✨ Full ROG Styling - Matches your Flow Z13's aggressive gamer aesthetic with the iconic ROG logo and ventilated design pattern that mirrors the exact diagonal slot pattern on the back of your ROG Flow Z13! This isn't just decoration - it's design coherence! 🎯
 

🛡️ Impact Protection - Reinforced structure guards against drops, kicks, and accidental impacts
 

🔌 Smart Cable Protection - The side shell (with 4 insert nuts) is the key component that clamps the entire case together while providing crucial protection for the flexible USB-C cable connector. The design allows proper flex without friction or stress points, extending your cable's lifespan significantly!
 

🌬️ Thermal Management Excellence - Those diagonal slots aren't just for looks! They're strategically placed to ensure optimal heat dissipation and airflow, keeping your power supply cool during extended gaming sessions. The heat (never excessive, but why take chances?) flows freely through the pattern 🌡️
 

🔩 Quality Assembly - Uses M2 insert nuts (3mm, x5) and M2 screws (5mm, x5) for a solid, rattle-free build. The lateral shell with 4 insert nuts acts as the clamping system that holds everything together securely!
 

📏 Perfect Fit - Precisely measured for the 130W ROG Flow Z13 power supply (80.3mm × 80.0mm × 29.2mm)

Print Statistics: 📊

• Total Material: ~17m of filament / 54g total weight
• Print Time: ~2h40m (model time) / ~3h5m (total with prep)
• Part Breakdown:
  • Base Box: 30g, 1h17m print time
  • Ventilated Lid: 16g, 55min print time
  • Lateral Clamping Shell: 8g, 26min print time
• Cost-effective: Less than €2 in material! 💰

Key Engineering Details:

• 3-piece modular design: Box base, ventilated lid, and the critical lateral clamping shell
• The side piece isn't just a cover - it's the structural backbone that locks the assembly and protects your most vulnerable component (the cable!)
• Diagonal ventilation slots positioned exactly like your Z13's rear vents - form meets function!
• Elevated feet keep the supply off dirty surfaces
• Easy cable management without pinch points
• Professional "REPUBLIC OF GAMERS" embossed branding

Print Info: 
✅ minimal supports needed! The design is optimized for clean printing 
✅ Recommended: PETG or ABS for heat resistance, but PLA works fine (my printed parts are in PLA) for normal use 
✅ Quick print: Under 3 hours for the complete set! 
✅ Minimal material usage: Just 54 grams - incredibly efficient design
 

Who needs this?

• ROG Flow Z13 owners tired of floor damage 📱
• Anyone who games in dorm rooms, coffee shops, or coworking spaces ☕
• Travelers who want to protect their gear in backpacks 🎒
• Clean desk enthusiasts who hate exposed power bricks 🖥️
• Anyone who's already replaced a damaged USB-C cable and wants to prevent it happening again! 💸

Fully designed from scratch in my studio - every detail was carefully considered to balance protection, aesthetics, thermal management, and cable strain relief. The ventilation pattern is a direct homage to ASUS's own engineering while serving a real thermal purpose.
 

Give your power supply the armor it deserves - engineered protection that looks as good as it performs! 🔥⚡

Total investment: 3 hours print time, 54g filament, infinite peace of mind 🛡️

Ambrosinus DEV
Design Space

lucianoambrosini.it