Six-in-One Ultimate Test for 3D Printer and Filament: Stringing, Retraction, Drying, Leaking, Scraping, Shaking

Note:

Please read the model description carefully before printing

This test is for extreme performance testing, please do not give the print profile a low rating due to test failure

This is a very practical model, offering many features while only requiring 31 minutes of printing and 3 grams of filament, and is compatible with almost all filaments

Six-in-One Test Introduction

Stringing: Tests whether filament strings during high-speed printing

Retraction: Tests extruder retraction performance and parameters

Drying: Tests whether the filament is dry

Leaking: Tests whether the nozzle is leaking

Scraping: Tests whether the tool head scrapes the model at higher positions

Shaking: Tests whether the model shakes at higher positions

Please note before printing

1. Thoroughly clean the build plate to prevent first layer adhesion issues
2. It is recommended to print with a nozzle that has not been used for fiber-reinforced filament
3. Do not use filament with non-standard diameter

Other Recommended Test Models

Multi-function Test Towerhttps://makerworld.com.cn/zh/models/1938658-duo-gong-neng-ce-shi-mo-xing-la-si-shou-suo-lu-qia#profileId-2152920

Hexagonal Infill Testhttps://makerworld.com.cn/zh/models/1889358-liu-bian-xing-tian-chong-ce-shi#profileId-2093661

Dual Material Inter-Support Testhttps://makerworld.com.cn/zh/models/1865819-shuang-cai-liao-hu-zhi-cheng-ce-shi#profileId-2065811

First Layer Testhttps://makerworld.com.cn/zh/models/1686950-a1-minishou-ceng-ce-shi-180mm-180mm-ke-yong-yu-jia#profileId-1854189

Finally, I wish everyone happy testing